Page 65 - Loading Publication

Basic HTML Version

ID XPANSION,.CLAMP
The ID Xpansion"' Clamp is the ideal way to hold part on an inside diameter
for multiple machining on a vertical machining center or a horizontal
machining center.
These machinable clamps are produced in 8 sizes and can hold internal
diameters from 8mm to over 103mm. The clamps use a heat treated tapered
screw for expansion.
The larger diameter of the clamp is held to a close tolerance for precision
locating in a machined pocket on
work
cubes and fiXture plates.
The customer machines the mild steel clamp to match the bore of the part
ensuring proper
fit.
Often times the clamps can be remachined for different
size jobs.
One
of
the benefits
of
these low profile clamps is holding may lathe
parts,
for
secondary machining, on one compact
set
up. They are quickly tightened
with a hex key, torque driver or can be mated to hydraulic pull cylinders for
automation.
D
Low Profile
D Ideal for Secondary Operations on Lathe Parts
D Allows More Parts Per Workcube or Fixture Plates
D
Excellent for Palletized Setups
D Screw Coated to Prevent Seizing
D Clamp Body Made
of
Soft Steel for Machinability
D Tighten with Hex Key or Hydraulic Pull Cylinders (Screw protrudes
from bottom of base)
PART
MODEL
A
B
c
D
·-
F
ot
NUMBER
NUEER
E,•
38000
#00
10.7
7.6
6.1
3.0
20.00
7.4
4.1
38050
#0
21.8 16.0 15.0
5.9
29.72
12.4
7.1
38100
#1
24.9 19.0 15.0
5.9
31.5
14.2
12.2
38150
#2
24.9 19.0 15.0
5.9
37.5
20.0
13.5
38200
#3
28.6 22.2
17.5
6.4
50.0
27.0
18.0
38250
#4
31.6 25.4 20.6
6.4
56.0
35.3
23.0
38300
#5
39.6 31.8 27.0
7.9
69.5
42.0
29.3
38350
#6
39.6 31.8 27.0
7.9
75.5
51.5
29.3
38400
#7
45.5 37.6 32.3
7.9
105.5
77.7
29.3
38450
#8
45.5 37.6 32.3
7.9
132.9
103.12 29.3
38500
#9
45.5 37.6 32.3
7.9
132.9
175.0
29.3
38550
#10
45.5 37.6 32.3
7.9
152.4
250.2
29.3
Gf- Minimum diameter the "F" dimension can
be
machined orturned down
to.
H*-
(3)Mounting Screws included.
D
H*
M2 on 13.7 BHC
M3 on 20.95 BHC
M3 on 23.1 BHC
M3 on 29.0 BHC
M4 on 39.4 BHC
M4 on 45.5 BHC
M5 on 55.9 BHC
M5 on 63.9 BHC
M6 on 92.6 BHC
M6 on 118.06 BHC
M6 on 118.06 BHC
M6 on 133.35 BHC
MACHINING AND INSTALLATION
~!!!!~JP.!f.l
MADE IN U.S.A.
J
HOLDING
FORCEN
M2
4.1
1113
M4
7.2
4228
M6
11.2
8455
M8
13.2
11125
M10
16.3
20025
M12
20.3
26255
M16
21.4
44500
M16
21.4
44500
M16
19.3
44500
M16
19.3
44500
M16
19.3
44500
M16
19.3
26000
D Expand clamp approximately 0.1mm over relaxed diameter and machine
to
fit workplace bore, either on lathe or mill
D If machining the clamp on a lathe use the nut provided, on the back
of
the clamp, to tighten the tapered screw. This nut Is used
only
to
machine the clamp.
D Machine a pocket, In the fixture, for the close tolerance "E" dimension and drill and tap mounting holes per "H" column. Drill and
tap a hole from the "I" column In the center
of
the pocket for the tapered screw.
D A recessed dowel pin may be installed into the flange for additional rigidity if required.
ALSO AVAILABLE SIDE-LOC EXPANSION CLAMPS FOR BLIND HOLES - FOR DETAILS WRITE TO US OR VISIT -.miteebite.com
65