Page 44 - Loading Publication

Basic HTML Version

Toggle Clamps- Pneumatic Operation
INTRODUCTION
Toggle Clamps with Pneumatic Operation have a Pneumatic cylinder mounted for operation only, the clamping force exerted comes from the
toggle mechanism. Pneumatic operation has following advantages :
0 High speed operation
0
Any
number
of
clamps can
be
operated simultaneously with the help
of
a switch.
0 Clamps can be operated In any desired sequence automatically by controlling the cycle electrically.
0 Clamps can be mounted
at
normally inaccessible position which are not in operator's reach for manual operation.
0 Reed switch mounted pneumatic cylinders can
be
used if position sensoring is required.
'TOOLFAST' Toggle Clamps with Pneumatic Operation are available in different sizes in both Hold Down Action and Push Action as
given below.
HOLD DOWN TOGGLE CLAMP • PNEUMATIC OPERATION
'TOOLFAST' Hold Down Toggle Clamps with Pneumatic Operation are available in following sizes and following two types of arms :
U-Ann :·This is the most widely used type which permits to locate the damping spindle anywhere along the length
of
the arm.
ST· Ann :·This is a solid bar with a tapped hole at the end. This arm can also be cut
to
any required length and hole can be made at any
desired position or a separate damping assembly can be welded at any desired point as per the application.
MODEL
POHD-35·U
POHD-35-ST
POHD-50-U
POHD-60-ST
POHD-85-U
POHD.-5-ST
ST-ARM
SOLID BAR WITH
TAPPED HOLE
U-ARM
ARIITYPE"
A
U-ARM
36
ST-ARM
U-ARM
49
ST-ARM
U-ARM
85
ST-ARM
B
IIAX.
65
95
135
•Above models ara alao available In BR ARM.
MOUNTIIIG BASE
c
E
F
N
60
32
19
8
75
44
28
8.5
110
70
50
12.5
J
SUITABLE FOR
HOLDING
N.W.
I
SPINDLEDIA
L
H
CAPACITY
Kp.
8G
1.52
6.8" 16
M-8
276
81
200
Kgs.
1.60
2.57
8.~
18
M-10
345
104
400
Kgs.
2.67
7.40
10.~
32
M-16
499
167
700
Kgs.
7.83
Standard Accessories provided with Clamp : Standard Hex. Head Clamping Spindle assembly is provided as standard accessory with all
above clamps. U-Arm models are provided with 2 nos. U-Fianged Washers also along with clamping spindle assembly.
Optional Accessories : User can select an optional damping spindle assembly as per the application from the different types
of
clamping
spindle assemblies shown on one of the following pages and order these separately.
44