Page 40 - Loading Publication

Basic HTML Version

Toggle Latch Clamps
PULLACTION CLAMP· LATCH TYPE • HORIZONTAL CUM VERTICAL
Pull Action Clamps are Latch type clamps used for sealing chambers, lids, doors
of
moulds, drums, containers or other vessels etc. Also suitable
for clamping moulds in industries such as resin, fibre glass, chemical
&
food.
'TOOLFAST' Pull Action Clamp has a unique design which enables use
of
the same clamp as a horizontal pull action clamp as shown in figure
(A) as well as a vertical pull action clamp as shown in figure (B) below by using
two
different holes H1 and H2 for pulling pin P
to
be located in.
Clamp is supplied complete with U-bolt & latch Plate.
Same
Clamp Can
Be Used For
Horizontal As well As
Vertical Locking
FIGURE(A):
PAC BEING USED AS
HORIZONTAL PULL ACTION CLAMP
THE PULLING PIN P ALONGWITH THE U-BOLT IS ASSEMBLED
USING HOLE H1 SO THAT THE CLAMP IS USED FOR
HORIZONTAL LOCKING AS SHOWN BELOW.
------ v-----
FIGURE(B): PAC BEING USED AS
VERTICAL PU LL ACTION CLAMP
THE PULLING PIN P ALONGWITH THE U- BOLT IS ASSEMBLED
USING HOLE H2 SO THAT THE CLAMP IS USED FOR
VERTICAL LOCKING AS SHOWN BELOW.
PULLING PIN P
IN HOLE H2
RED VINYL GRIP
STAINLESS STEEL
RfVET AS PIVOT PIN
LOCKING IS DONE WHEN ADJUSTABLE U-BDLT IS PLACED AROUND THE
SLOT Sl OF LATCH PLATE IN POSITION A AND THE HANDLE IS PULLED
DOWN TO REACH THE LOCK POSITION.
TO ENSURE THAT THE CLAMP LOCKS POSITIVELY. IT IS IMPORTANT THAT
THE BASE OF CLAMP AND THE BASE OF LATCH PLATE ARE PROPERLY
ALIGNED AS SHOWN ABOVE.
B
w
MODEL
A1 A2
dfJ
u
v
THREAD
LENGTH
Min.
Mu.
c
PAC-4-HV
13
4 413
22
90
52
5
42
32
PAC~-HV
17
6
613
34
128
68
5
55
46
PAC+HV
24
8
813
48 165
87
5
67 58
LATCH
IN POSITION B
OPPOSITE TO POSITION A IN FIGURE(A)
LOCKING IS DONE WHEN ADJUSTABLE U- BOLT IS PLACED AROUND THE
SLOT 52 OF LATCH PLATE IN POSITION B AND THE HANDLE IS PULLED
DOWN TO REACH THE LOCK POSITION.
TO ENSURE THAT THE CLAMP LOCKS POSITIVELY, IT IS IMPORTANT THAT
THE BASE OF THE LATCH PLATE IS ALIGNED WITH THE FRONT EDGE OF
THE CLAMP BASE IN PERPENDICULAR POSITION AS SHOWN ABOVE.
MOUNTING BASE
MOUNTING BASE
HOLDING
N.W.
OF CLAMP
OF LATCH PLATE
H
L
CAPICITY
Kp.
D
E
F II
N
GIJ
J
K
s
T
lfiJ
35 20 15 6 14 51Zl
15 30 12 12
513
53 100
150
Kgs.
0.16
54
26 19 10 19 6.81Zl 23 36 15 15
5.513
75 152
400
Kgs.
0.49
55 38 26 10 20 8.51Zl 35 50 20 20 8.513 96 185
900
Kg&.
1.06
PAC-4-+IV and PAC++IV are also available in stainless steel as model PAC-4-+IV..S.S. and PAC-6-+IV..S.S. respectively.
40